wireless connection to internet

What you’ll need to set up your wireless network

1.A broadband (DSL or cable) Internet connection

To set up a wireless network, you need a broadband or high-speed Internet connection (not a dial-up connection) provided by an Internet service provider (ISP),you will usually be charged for a monthly fee. Two of the numerous broadband technologies are Digital Subscriber Line (DSL) and cable technology. These require a DSL modem or a cable modem. After you have an ISP and a modem, you're ready to connect to the Internet.
2.A wireless router, a DSL modem, or a cable modem with built-in wireless networking support 
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. If the modem router you received or purchased from your ISP already has wireless capability built in, you do not need to purchase a separate wireless router. Just follow the instructions provided by your ISP for activating your wireless connection.
3.An operating system that supports wireless networking
The Windows 7 operating system fully supports wireless networking.
4.A computer with built-in wireless networking support or a wireless network adapter
If you have a newer computer, you may already have built-in wireless capabilities,then you don’t need a wireless network adapter.If your desktop or laptop computer does not have built-in wireless support, you need to purchase a network adapter to wirelessly connect your computer to your wireless router. If you need an adapter for a desktop computer,you will need to  buy a USB wireless network adapter. If you have a laptop,then purchase a PC card-based network adapter. Ensure that you have one adapter for every computer on your network.
5.A copy of your router setup instructions
Before you begin setting up your wireless network, it’s always advisable to make sure that you have the copy of the setup instructions provided by the router manufacturer or your ISP. If you do not have a copy, visit the manufacturer’s website for get instructions on how to set up your router. All routers vary, and you may need to consult the instructions to set up your wireless network using your specific router.

AFTER YOU HAVE EVERYTHING NEEDED TAKE THE FOLLOWING STEP

1. Connect to the Internet

Make sure that your Internet connection and your DSL or cable modem are working. Your wireless network depends on this connection.

---

2. Connect your wireless router

These are the steps for connecting a stand-alone wireless router to your DSL modem or cable modem. If you have a modem router, follow your ISP’s instructions for connecting your network.
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
Next, connect your router to your modem:

3. Configure your wireless router

 

Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WAN, or WLAN). If you need to, turn your computer on. It should automatically connect to your router.
Next, open Internet Explorer and type in the URL or address to configure your router
There may be multiple website addresses you can use.

Router	Address	Username	Password
3Com	http://192.168.1.1	admin	admin
D-Link	http://192.168.0.1	admin	admin
Linksys	http://192.168.1.1	admin	admin
Microsoft Broadband	http://192.168.2.1	admin	admin
Netgear	http://192.168.0.1	admin	password
Actiontec	http://192.168.0.1	username	password

Internet Explorer shows your router's configuration page, along with the modem IP address and other information. Most of the default settings should be fine, but you need to configure three things:
NOTE: Do this on the computer that you are using to set up your wireless network. The computer automatically links you to the router’s page. If you type the router’s URL on a different computer, typing the address in the navigation bar will not take you to your router’s configuration page.
On the router configuration page, you might be prompted for a password. The address and password you use varies depending on what type of router you have, so refer to the instructions included with your router or on the manufacturer’s website.
For quick reference, this table shows the default addresses, user names, and passwords for some common router manufacturers. If the address is not listed here, you can read the documentation that came with your router or go to the manufacturer's webpage to find it.
The exact steps you follow to configure these settings will vary depending on the type of router you have. After each configuration setting, be sure to click Save Settings, Apply, or OK to save your changes.
Now, before connecting your computers and devices to the network, you should disconnect the wireless network cable from your computer.

4. Connect your computers, printers, and other devices to the wireless network

You can connect multiple computers, printers, and many other peripheral devices, such as  cell phone, iTouch, or iPad, to your network. Before you connect them to your network, make sure that the computer or device you want to add has built-in wireless networking or a network adapter. Many newer devices have built-in wireless capability. If the computer or device you want to add does not have built-in wireless network support, plug the network adapter into your USB port and place the antenna on top of your computer (in the case of a desktop computer) or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows automatically detects the new adapter and may prompt you to insert the CD that came with your adapter. The on-screen instructions guide you through the configuration process.

5. Share files, printers, and more

Now that your computers and devices are connected, you can begin sharing files, printers, games, and much more. One of the top reasons for setting up a home network is to share a printer. Another is to share files. The steps for doing this, however, aren’t always obvious, so here are instructions to get you started:

free recording soft ware

Being a musician can be expensive. With musical instruments, equipment and software you normally get what you pay for, and we want to sound good! So we pay, and pay big. But it’s good to know you can get some things for free.
sometimes ago a writer wrote an article “8 Free, Cross-platform Apps for Musicians“, listing some really useful music utilities and programs that you can get at no cost. Many of you are Windows users, and pointed out that there is some useful Windows software that was not included in the article because it doesn’t cross-platform. Well, this article is for you!
Of course, Windows has its own problems when it comes to recording music. It can slow down over time, is susceptible to malware that slows it down further, and doesn’t have the best latency out of the box. Next week we’ll look at some ways of tuning your Windows box for the best results.
In the meantime, here are 7 digital audio recording apps for Windows:

1. KRISTAL Audio Engine

 

License: KRISTAL Audio Engine is free for personal, educational and non-commercial use. A commercial license is available. Website: www.kreatives.org/kristal.
From the website, “KRISTAL Audio Engine is a powerful multi-track recorder, audio sequencer and mixer – ideal for anyone wanting to get started with recording, mixing and mastering digital audio. It is designed as a modular system. The main application provides a mixing console, while the audio sequencer, live audio input and so on are loaded as separate Plug-Ins”
The program records up to 16 tracks at a maximum of a 192 kHz sample rate. It supports WAV, AIFF, FLAC, and OGG Vorbis audio formats. It includes plug-ins for sequencing, effects (including KristalMultiDelay, KristalChorus, KristalReverb, Kristalizer), and for using VST effects in realtime.
The program is no replacement for a high end DAW, but should get you started in the world of recording digital audio.

2. Wavosaur Free Audio Editor

License details on the website are sketchy, but the program is free to use. Website: www.wavosaur.com.
From the website: “Wavosaur is a free sound editor, audio editor, wav editor software for editing, processing and recording sounds, wav and mp3 files. Wavosaur has all the features to edit audio (cut, copy, paste, etc.) produce music loops, analyze, record, batch convert. Wavosaur supports VST plugins, ASIO driver, multichannel wav files, real time effect processing. The program has no installer and doesn’t write in the registry. Use it as a free mp3 editor, for mastering, sound design.”
I haven’t tried the program, so it’s difficult for me to compare it with KRISTAL. I’d be interested in your comments. The specs on the features page indicate it may be a better program. Like KRISTAL, it has a sample rate up to 192 kHz and support for VST effects, but there is no mention of a track limit like KRISTAL has.

3. Audacity

License: GPL (open source). Website: audacity.sourceforge.net.
This well-known program was mentioned in Joel’s article, and also deserves a mention here. It’s an awesome light-weight dedicated audio editor capable of editing multiple tracks. It supports Ogg Vorbis, MP3, WAV or AIFF sound files.
From some of the comments left on Joel’s article, it sounds like some of you use Audacity for just about everything. It’s the Swiss army knife of audio apps. I used it to MP3 my cassette collection years ago.

4. trakAxPC

License: Seems to be free of cost for any use. Website: www.trakax.com/software/pc.
Their website boasts, “TrakAx empowers you to create professional music and video mixes in an easy-to-use and fun environment. Whether you are creating a music track for your MySpace page or a video for YouTube, TrakAxPC is the most powerful FREE application on the web.” Features include beat matching, a drag-and-drop interface for mixing and adjusting tracks, and video editing features. Audio formats supported include WAV, MP3, OGG, and WMA.
Trakax.com’s website is very slick. If the software is comparable, it may just deserve a place in your software toolkit. It may be a great DAW to get started on. The site also sells royalty-free loops, beats and tracks for a price.